Boeing conducts structural acoustics testing on aircraft fuselages in the Interior Noise Test Facility (INTF).
This facility features both an anechoic and a reverberant chamber and is designed to test and measure noise from environmental control systems and hydraulic systems. The INTF can accommodate testing systems and complete aircraft fuselage sections.
Specifications:
Anechoic Chamber Characteristics:
- Chamber size: 58 feet x 41 feet x 31 feet high wedge tip to wedge tip
- Chamber construction: double wall
- Operating frequency range: 100 Hz to 80 kHz
- Chamber absorption coefficient: 0.99 at 100 Hz and above. Meets ANSI S12.35 - 1990. Details of the test can be found in NTL5501 - 29, the anechoic room checkout document found in the INTF control room.
- Air system: The room has an air conditioning system, air supply system, a vacuum system, and a fuselage pressurization system.
Reverberant Chamber Characteristics:
- Chamber size: 35 feet x 29 feet x 22 feet 9 inches high
- Chamber construction: double wall
- Operating frequency range: For rigorous sound absorption tests: 160 Hz to 2 kHz. For transmission loss tests: 160 Hz. to 5000 Hz.
- Chamber absorption coefficient: typically less than 0.06 below 2000 Hz. Increases above 2000 Hz. due to air absorption.
- Air system: The room has an air conditioning system, air supply system, a vacuum system, and a fuselage pressurization system.
The facility's anechoic and reverberant chambers are joined by a unique 10 x 10 foot window, and can be used in testing transmission loss. Noise can be generated at the same time inside and outside of the section being tested. This facility:
- Generates sound fields on panels and fuselage exteriors
- Measures noise from ECS and hydraulic systems
- Includes Data system that acquire and processes pressure, temperature, and vibro-acoustic information
- Provides air sources and vacuum
- Runs environmental control and hydraulic systems
- Handles very high heat loads like those that occur when engine bleed air is being conditioned for use in an aircraft cabin.
If you would like to join the companies using the testing resources available at The Boeing Company, contact the Boeing Technology Services Marketing Manager Ms. LeAnn Diessner at 206-662-4287, request a quote online, or e-mail us for more information about our test capabilities.