0XXX -- SOLICITATION INFORMATION
| NEW NO. | OLD NO. | CLAUSE TITLE/TEXT |
|---|---|---|
| 00XX | INSTRUCTIONS, CONDITIONS AND EVALUATION | |
| 0001 | NEW* | SOLICITATION INSTRUCTIONS |
| Seller shall comply with the instructions herein when responding to the solicitation. | ||
|
1. Solicitation responses received after the specified "Bid Close Date" may be considered nonresponsive. Any extension of the "Bid Close Date" must be approved by the MDC Purchasing Representative. 2. Seller shall provide pricing for the next highest quantity break, if any, above the quantity specified herein. 3. Solicitation responses must be based upon zero shipping tolerance. If Seller's offering price can be reduced by allowing for shipping tolerances, Seller must so indicate by quantifying the reduction and specifying the shipping tolerance. 4. Seller shall indicate any manufacturer's part number if the solicitation response proposes an equivalent item other than the requirement stated herein. 5. Seller shall return the original Request For Quotation, completed with the information indicated below and signed and dated. If Seller received a Request For Proposal (RFP), the information indicated below must be provided as part of the solicitation response: a. Terms of Payment; b. FOB point (if different); c. Unit price for quantities indicated, Seller's corresponding unit of measure and the extended price (total of the quantity required multiplied by the unit price); d. Seller's delivery schedule. Note that if Seller can deliver in accordance with the MDC required schedule, a separate indication of schedules is not required; e. Production lead-time required (in weeks). 6. Seller shall carefully review all documents referenced and received with MDC's solicitations (RFP/RFQ) to ensure the following: a. All information required to properly respond to the solicitation has been received; b. All tooling and material requirements, processes and procedures are understood and priced accordingly in the response to the solicitation. 7. Seller accepts the responsibility to contact the MDC Purchasing Representative, at the number noted on the solicitation, to resolve questions or concerns regarding the solicitation. 8. Requests from successful Seller (i.e., Bidder) for additional funding or schedule adjustments to cover factors not initially included in the response to the solicitation will not be recognized by MDC; thus Seller shall be held liable to meet all requirements, including but not limited to price and delivery, as originally quoted. 9. Seller acknowledges by its response to this solicitation that no former MDC employee is representing Seller in connection with this solicitation or any resulting order pursuant to the requirements of Article I of either Form DAC 26-685, or Form DAC 26-800, as applicable. |
||
| 0002 | NEW* | SPECIAL INSTRUCTIONS REGARDING PARTS MANUFACTURER APPROVAL |
| Work awarded pursuant to this solicitation will result in Seller providing
parts which will be installed into a Federal Aviation Administration (FAA)
type certificated Aircraft (parts hereinafter designated "Aircraft Parts"). Except
for standard parts (such as nuts and bolts) conforming to established industry
or United States specifications. Aircraft Parts must be produced
under an FAA approval such as a Technical Standard Order (TSO) or Parts
Manufacturer Approval (PMA) or an equivalent foreign approval recognized
by the FAA under a bilateral agreement with the government of the foreign
country. Federal Aviation Regulation, Part 21, Subpart K, applies to this transaction. Seller must complete and return with its solicitation response Form DAC 26-913, Representations Regarding Approval Status of Seller, which form may be found in Section V of Form DAC 26-730, Solicitation Clauses and Terms and Conditions for Procurement. Seller will indicate its status with respect to the required government approval or its commitment to obtain the required government approval (as mandated by the general terms and conditions of the anticipated award) on the form. |
||
| 0004 | NEW* | QUOTATIONS SENT VIA FACSIMILE (FAX) |
| Return of the solicitation response via facsimile (FAX) transmission to MDC is expressly authorized. Reference the solicitation number on the FAX cover sheet and include the MDC address and the name and location of the MDC Purchasing Representative. The telephone number of the FAX machine(s) authorized to receive the transmission of the solicitation response is indicated on the solicitation. In addition, Seller shall send the original solicitation response to the MDC Purchasing Representative in accordance with the requirements of Clause 0005, as applicable. WARNING: to ensure the integrity of the solicitation process, MDC strongly urges Sellers to use only FAX machine(s) specifically authorized for receipt of controlled bids and reserves the right to deem any solicitation response to be nonresponsive and ineligible for award if it was submitted via a FAX machine not authorized in writing by MDC. | ||
| 0004A | NEW* | FAX-ONLY QUOTATIONS |
| Return of the solicitation response via facsimile (FAX) transmission to MDC is expressly authorized and is the only acceptable method of response. Reference the solicitation number on the FAX cover sheet and include the MDC address and the name and location of the MDC Purchasing Representative. The telephone number of the FAX machine(s) authorized to receive the transmission of the solicitation response is indicated on the solicitation. Suppliers are cautioned that responses received after the date required by the solicitation or by means other than FAX will not be considered. | ||
| 0005 | NEW* | RETURN QUOTE TO BID CONTROL |
| Return the solicitation response via U.S. mail to recognized common carrier in the DAC (blue) bid envelope, Form DAC 26-661, to the address indicated on the solicitation. To ensure the solicitation response is received by the proper Bid Control Center, the specific location and internal mail code must be incorporated into the address by the Buyer. Reference the solicitation number on the envelope. If the solicitation response cannot be placed in the envelope provided, the DAC bid envelope must be attached to the outside of the package. Where multiple volumes of the solicitation response are provided, only the volume which contains the cost or pricing information must go to bid control. All other volumes may be sent directly to the MDC Purchasing Representative. | ||
| 0005A | RESERVED | |
| 0006 | NEW* | RETURN QUOTE TO BUYER |
| Return the solicitation response via U.S. mail, common carrier, TWX or facsimile (FAX) directed to the attention of the buyer at the address shown on the solicitation. The Buyer's name, location, internal mail code and the telephone number of the FAX machine(s) authorized to receive transmission of solicitation responses are shown on the solicitation. | ||
| 0010 | D-5 | SELLER SIZE AND POINT OF MANUFACTURE |
| Seller's solicitation response must state the number of employees of Seller, the place of manufacture of the items, and whether Seller is a large or small business. | ||
| 0015 | D-11 | PREAWARD ON-SITE EQUAL OPPORTUNITY COMPLIANCE REVIEW |
| An award in the amount of $1 million or more will not be made under this solicitation unless the Seller is found, on the basis of a compliance review, to be able to comply with the provisions of the equal opportunity Clause of this solicitation. | ||
| 0020 | D-12 | SELLER OFFSET COMMITMENT |
|
Seller's solicitation response must include a firm commitment to support MDC's offset, coproduction and similar obligations to certain foreign governments (hereinafter collectively called "offset" obligations). These offset obligations have been accepted by MDC as requirements for the sale of products to these foreign customers. The commitment proposed by Seller will be a factor in MDC's evaluation of Seller's solicitation response. In order that Seller's commitment relates to MDC's offset obligations, such firm commitment is expected to approximate twenty-five percent (25%) of the value of any contract that may be awarded as a result of this solicitation. Most offset obligations require approximately one-third of the total to be in coproduction (aircraft related products) and the remaining two-thirds can be in counter-trade (goods and services used in any of Seller's operations; transfers of technology, joint ventures; and travel and tourism involving the customer airline). Obtaining credit for offset commitments by MDC and MDC's suppliers requires a formal procedure that varies among the countries. Credits are usually granted for business instigated by MDC and its suppliers with advance notice to the customers. If a contract is awarded to Seller as a result of this solicitation, an agreement separate from the awarded contract will be entered into to cover the details of Seller's firm commitment. If additional information regarding the offset program is necessary for Seller to respond to this solicitation, contact the MDC Purchasing Representative. Questions and answers will be provided to all respondents. |
||
| 0030 | G-2 | EVALUATION OF QUOTE |
| MDC reserves the right to reject any and all solicitation responses and to evaluate all solicitation responses with regard to quality, price, assurance of timely delivery, and all other factors that MDC, in its sole discretion, deems relevant. | ||
| 0031 | B-6 | ALTERNATE QUOTES |
| Seller is invited to submit additional, alternate solicitation responses which might reduce the price by taking advantage of price breaks, delivery schedule variations, more economical packaging, bulk handling or changes to configurations, materials, tolerances, finishes, etc. which will not impair any essential characteristics of form, fit or function, such as service life, reliability, ease of maintenance or interchangeability. | ||
| 0032 | C-1 | QUOTE FIRM FOR THREE MONTHS |
| Seller must accompany its solicitation response with a written assurance that it will be held open and not revoked for lack of consideration for a period of three (3) months. | ||
| 0040 | G-1 | NO BID RESPONSE |
| If Seller declines to submit a solicitation response for any item described in this solicitation, Seller is requested to state the reason for such "No-Bid" response. | ||
| 0050 | B-5 | DISCOUNTS FOR PROMPT PAYMENT |
| The amount and terms of any prompt payment discount proposed in Seller's solicitation response will be a factor in MDC's evaluation of the solicitation response. | ||
| 0060 | D-1 | POTENTIAL SPLIT REQUIREMENTS |
| Unless Seller otherwise specifies in its solicitation response, MDC may accept any item or group of items and may make an award on any item for a quantity less than the quantity stated at the unit price indicated. | ||
| 0070 | A-2 | CLASSIFIED INFORMATION |
| In order to respond to this solicitation, Seller must have access to classified matter. All classified matter furnished in connection with this solicitation must be controlled in accordance with the provisions of the Department of Defense Industrial Security Manual, as revised. Such material shall be returned to MDC in accordance with Paragraph 64 of said manual. | ||
| 0075 | RESERVED | |
| 0080 | NEW* | NOTICE OF RESTRICTIONS ON CONTRACTING WITH SANCTIONED PERSONS |
|
1. Statutory prohibitions have been imposed on contracting with sanctioned persons, as specified in Federal Acquistion Regulation (FAR) 52.225-13, Restrictions on Contracting With Sanctioned Persons. 2. By submission of the solicitation response, Seller represents that no products or services (except those which Seller expressly indicates in the solicitation response), delivered to MDC or the Government under any contract resulting from this solicitation, will be products or services of a sanctioned person as defined in Paragraph 1 of this Clause, unless one of the exceptions in Paragraph (d) of FAR 52.225-13 applies. |
||
| 01XX | CERTIFICATIONS | |
| 0101 | E-1 | SELLER'S EQUAL EMPLOYMENT OPPORTUNITY REPRESENTATION |
| Form MDC 858-3, Equal Opportunity -- Quotation Conditions, shall be executed and returned with the solicitation response. Note: The referenced Form may be found in Section V of the Form DAC 26-730. | ||
| 0110 | E-6 | SMALL BUSINESS AND SMALL DISADVANTAGED BUSINESS SUBCONTRACTING PLAN CERTIFICATE OF COMPLIANCE |
| If the total value of Seller's solicitation response exceeds $500,000, Form DAC 26-841, Small Business and Small Disadvantaged Business Subcontract Plan Certificate of Compliance, shall be executed and returned with the solicitation response. Note: The referenced Form may be found in Section V of the Form DAC 26-730. | ||
| 0120 | E-2 | COST ACCOUNTING STANDARDS (DAR) |
| Cost Accounting Standards Certification Quotation Conditions, Form DAC 26-878, shall be executed and returned with the solicitation response. Note: The referenced Form may be found in Section V of the Form DAC 26-730. | ||
| 0121 | NEW* | COST ACCOUNTING STANDARDS (FAR -- DEFENSE) |
| Cost Accounting Standards Certification Quotation Conditions (FAR -- Defense), Form MDC 417, shall be executed and returned with the solicitation response. Note: The referenced Form may be found in Section V of the Form DAC 26-730. | ||
| 0122 | NEW* | COST ACCOUNTING STANDARDS (FAR -- NONDEFENSE) |
| Cost Accounting Standards Certification Quotation Conditions (FAR -- Nondefense), Form MDC 417-1, shall be executed and returned with the solicitation response. Note: The referenced Form may be found in Section V of the Form DAC 26-730. | ||
| 0130 | E-3 | CERTIFICATION OF CURRENT COST OR PRICING DATA (DAR/NASA) |
| Subcontractor's Certificate of Current Cost or Pricing Data, Form MDC 450-3, shall be executed and returned upon completion of negotiations (not with the initial solicitation response). Note: The referenced Form may be found in Section V of Form DAC 26-730. | ||
| 0131 | E-4 | CERTIFICATION OF CURRENT COST OR PRICING DATA (FAR) |
| Subcontractor's Certificate of Current Cost or Pricing Data, Form MDC 858-2, shall be executed and returned upon completion of negotiations (not with the initial solicitation response). Note: The referenced Form may be found in Section V of Form DAC 26-730. | ||
| 0132 | NEW* | COST OR PRICING DATA THRESHOLD (FAR) |
| The dollar threshold for requiring a Certificate of Current Cost or Pricing Data is $500,000 through December 31, 1995, after that date the threshold shall revert to $100,000. | ||
| 0140 | E-5 | CLEAN AIR AND WATER CERTIFICATION |
| If the total value of Seller's solicitation response exceeds $100,000, a Clean Air and Water Certification, Form MDC 858-6 shall be executed and returned with the solicitation response. Note: The referenced Form may be found in Section V of the Form DAC 26-730. | ||
| 0150 | RESERVED | |
| 0160 | B-4 | ROYALTY INFORMATION |
| If Seller's solicitation response contains costs or charges for royalties totalling more than $250.00, Form DAC 26-628 shall be completed and provided to MDC with the solicitation response. Each separate item of royalty or license fee must be reflected on a separate Form DAC 26-628. In addition, as a condition to the execution of the contract contemplated by the solicitation, MDC may request a copy of the current license agreement and the identification of applicable claims of special patents. Note: The referenced Form may be found in Section V of the Form DAC 26-730. | ||
| 0170 | RESERVED | |
| 0171 | RESERVED | |
| 0180 | NEW* | DEBARMENT, SUSPENSION, AND PROPOSED DEBARMENT CERTIFICATION |
| Seller shall execute and return with its solicitation response, Form DAC 26-904, Debarment, Suspension, and Proposed Debarment Certification. Note the referenced Form may be found in Section V of the Form DAC 26-730. | ||
| 0181 | NEW* | DISCLOSURE REGARDING PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS |
| By signing and returning its solicitation response to MDC, Seller certifies that it is in compliance and agrees with Form DAC 26-906, Certificate and Disclosure Regarding Payments to Influence Certain Federal Transactions, which is located in Section V of the Form DAC 26-730. | ||
| 02XX | FINANCIAL | |
| 0201 | B-1 | COST BREAKDOWN |
| Seller shall prepare the cost/price portion of the solicitation response and submit Standard Form (SF) 1411 for work to be performed under Government contracts or a combination of Government and commercial contracts. For purposes of this Clause "Government Contract" includes work to be performed which is designated as "Government Management Risk" funding. Seller shall submit Form DAC 26-687 for work to be performed under a commercial contract. The forms and form instructions are located at Section V of the Form DAC 26-730. Seller's compliance with the form instructions will be used by MDC in the evaluation of the solicitation response. | ||
| 0202 | NEW* | COST BREAKDOWN -- DATA ITEMS |
| Seller shall prepare a detailed cost breakdown for technical publication data items by submitting a completed Form DAC 26-700 with the solicitation response. Estimated costs for data items shall include only those costs which are generated solely as a direct result of the imposition of the data requirement. Each data element shall be priced separately. Allowable costs for technical publication data includes all effort to generate the document such as research, technical illustration, copy preparation and photography but excludes all initial design and development effort. Note: The referenced Form may be found in Section V of the Form DAC 26-730. | ||
| 0205 | NEW* | CONTRACT FACILITIES CAPITAL COST OF MONEY |
| Seller shall submit a completed Form DD 1861, Contract Facilities Capital Cost of Money, to the MDC Purchasing Representative with its solicitation response. MDC shall have the right to verify by audit any amounts claimed by Seller for land, buildings and equipment. Note: The referenced Form may be found in Section V of the Form DAC 26-730. | ||
| 0210 | D-2 | PROGRESS PAYMENTS |
| It is anticipated that, consistent with progress payments made available to MDC by the U.S. Government, progress payments will be available under the contract contemplated by this solicitation in conformance with the standards for customary progress payments stated in Paragraph 503 of Appendix E of the Defense Acquisition Regulation or Section 32.501 of the Federal Acquisition Regulation. The need for progress payments will not be considered as a handicap or adverse factor in the award of the Purchase Order/Contract. | ||
| 0220 | PERFORMANCE MEASUREMENT INFORMATION | |
| Seller must include in its solicitation response a current financial statement (including balance sheet and latest income statement). In addition, a proposed cumulative monthly termination liability schedule, time-phased expenditure profile, controlled item master schedule, and a monthly status report must be submitted. Selected items will be made a part of the Purchase Order/Contract when issued. MDC's maximum liability will be limited in accordance with the termination liability schedule incorporated into the Purchase Order/Contract. | ||
| 0230 | B-2 | AGREEMENT TO FURNISH SUPPLEMENTARY PRICING INFORMATION |
|
By submission of a solicitation response Seller agrees: 1. Seller's books, records, documents and other supporting data shall be made available to MDC, or its authorized representative, for inspection and audit as required by MDC in connection with any negotiations prior to contract award. 2. Seller shall, upon request of MDC, furnish a statement in such form as stipulated by MDC, together with applicable projections and support data. Such statement shall be based on current, accurate and complete cost information and so certified by a responsible officer. 3. Seller's solicitation response must include the name of Seller's employee who is most familiar with cost and pricing data supporting the prices. 4. Seller agrees no restriction will be imposed on the release of any audit report to MDC. |
||
| 03XX | GOVERNMENT FACILITIES/PROPERTY | |
| 0301 | B-3 | RENT-FREE USE OF GOVERNMENT FACILITIES |
| Seller is requested to submit alternate solicitation responses if use of Government facilities, special tooling or test equipment on a rent-free basis is anticipated by Seller in performance hereunder. One solicitation response should show a price based on use of rent-free facilities, tooling and test equipment, and the other should show a price based on payment of rent for such usage. Said usage charge(s) shall conform to the rates prescribed in DAR 13-403 or FAR 45.403. Seller shall identify the Government facilities contract, the Administrative Contracting Officer (including address and telephone number) with cognizance over the facilities contract, and provide a list of the property accountable to the facilities contract (including nomenclature, property identification or control number, acquisition date, and acquisition value). | ||
| 0310 | D-3 | CONTROL OF GOVERNMENT PROPERTY |
| Seller must submit with its solicitation response documentation evidencing Government approval of Seller's system for control of Government property, or if Seller has no Government approved system, Seller must submit to the MDC Purchasing Representative a copy of Seller's current property control procedure(s) for review and approval by MDC. Seller must cooperate with MDC representatives in the conduct of a property system survey by telephone, correspondence and/or through visits to Sellers' facility at reasonable times. | ||
| 04XX | TOOLING | |
| 0410 | NEW* | MDC FURNISHED TOOLING |
| See the solicitation for a listing of tooling anticipated to be provided in connection with the work to be performed under any resulting Purchase Order/Contract. | ||
| 0411 | NEW* | NO MDC FURNISHED TOOLING |
| MDC does not anticipate that any tooling will be provided to the Seller in connection with the work to be performed under any resulting Purchase Order/Contract. | ||
| 0420 | D-6 | SELLER TO IDENTIFY GOVERNMENT TOOLING/STE |
| Seller's solicitation response must identify all Government-owned special tooling and/or test equipment in Seller's possession suitable for use on the contract contemplated by this solicitation and must list the Prime Contracts under which such items were acquired. | ||
| 0430 | D-10 | LISTING, DESCRIPTION AND PRICING OF TOOLING AND ACCESSORIES |
| Seller must indicate if tooling or accessory equipment is required to produce the goods contemplated in this solicitation. For purposes of this Clause, tooling includes "use-only" tooling. If tooling or accessory equipment is required, Seller shall provide a complete listing, description and separate pricing with the solicitation response. | ||
| 05XX | INTELLECTUAL PROPERTY | |
| 0501 | A-1 | RESTRICTIVE LEGENDS ON SELLER PROPRIETARY DATA |
| MDC acceptance of any document marked with a restrictive legend does not indicate MDC agreement that information contained therein is proprietary. MDC will have the right to reproduce any submitted data, drawings or other material as required for evaluation purposes only, even though marked with a restrictive legend. It is understood that, in the event information contained in submitted documents is already within MDC's knowledge, is obtained from any source without restriction, or is for any reason not protectable at law, restrictive markings which purport to cover the information shall not be valid nor be binding upon MDC. | ||
| 0502 | NEW* | PROPRIETARY DATA CONTROL |
| All MDC furnished data and information relating to this solicitation,
including interface or other technical data of MDC's subcontractors which
is revealed to Seller, is considered to be proprietary to the McDonnell
Douglas Corporation (MDC) or MDC's subcontractors and all rights therein
are reserved. MDC hereby provides the Seller the right to use the proprietary
data and a limited license to reproduce any copyrighted material from this
solicitation based on the following conditions: The Seller arees that by accepting this soliciation and related documents that neither the solicitation data nor any part of the related information disclosed to the Seller shall be reproduced or transferred to other documents except for purposes relating to the Seller's response to this solicitation. The Seller agrees not to use or disclose to others, for manufacturing purposes or any other purpose, the data provided except as specifically authorized by McDonnell Douglas Corporation in this solicitation and any resulting Purchase Order/Contract. The Seller further agrees to respect the confidential nature of the disclosure, oral and/or written, and not to disclose to others except to discuss it within the Seller's own personnel or with subcontractors who agree to respect the confidential nature of this information and the conditions set forth in this Clause. The purpose of revealing this information to the Seller is to permit the Seller's employees to evaluate the data and to use the information in the preparation of the Seller's response to this MDC solicitation. If at a later date the Seller desires to use this information for any other purpose, the Seller agrees not to do so unless and until first obtaining either a formal Purchase Order/Contract from MDC or MDC's written permission.SELLER AGREES TO DESTROY OR RETURN THE DATA TO MDC IN THE EVENT THAT SELLER IS NOT SELECTED TO RECEIVE THE AWARD RESULTING FROM THIS SOLICITATION. The above obligations shall not apply or shall cease to apply, as appropriate, to the information disclosed when it can be established by Seller that the information was in the public domain at the time of this disclosure; such information was known to Seller prior to this disclosure; or such information has become known to Seller from an independent source which did not receive it from MDC under an obligation of confidence. |
||
| 0510 | NEW* |
SELLER'S ASSERTIONS & JUSTIFICATIONS FOR IDENTIFYING TECHNICAL DATA OR COMPUTER SOFTWARE WITH LIMITED OR RESTRICTED RIGHTS |
| Form DAC 26-875, Seller's Assertions and Justifications for Identifying Technical Data or Computer Software with Limited or Restricted Rights, is incorporated herein by reference. | ||
| 0511 | NEW* | NOTIFICATION OF TECHNICAL DATA -- IDENTIFIED AS LIMITED RIGHTS DATA |
| Form DAC 26-874, Notification of Technical Data That Will Be Identified as Limited Rights Data, is incorporated herein by reference. | ||
| 0512 | NEW* | NOTIFICATION OF PROPRIETARY NONCOMMERCIAL COMPUTER SOFTWARE/FIRMWARE -- RESTRICTED RIGHTS |
| Form DAC 26-873, Notification of Proprietary Noncommercial Computer Software/Firmware That Will Be Identified as Restricted Rights Data, is incorporated herein by reference. | ||
| 0513 | NEW* | NOTIFICATION OF PROPRIETARY COMMERCIAL COMPUTER SOFTWARE/FIRMWARE -- RESTRICTED RIGHTS |
| Form DAC 26-872, Notification of Proprietary Commercial Computer Software/Firmware That Will Be Identified as Restricted Rights Data, is incorporated herein by reference. | ||
| 0514 | NEW* | TECHNICAL DATA AND COMPUTER SOFTWARE |
| Except as set forth on forms DAC 26-872, 26-873, 26-874 or 26-875, and the subsequent approval of items set forth on any of these Forms by the Government Contracting Officer, Seller shall be required to deliver all technical data and/or computer software, contemplated by this solicitation response, with unlimited rights as defined in DFARS 252.227-7013, Rights in Technical Data and Computer Software. | ||
| 0520 | NEW* | EXPORT CONTROL OF TECHNICAL DATA |
| MDC is providing with this solicitation certain technical data which
is subject to export laws of the United States of America. Such data may not be used for any purpose other than preparing Seller's response to this solicitation. If the data will be needed by foreign subcontractors, Seller must identify each such proposed foreign subcontractor, the country of origin, the kind of work to be subcontracted and the anticipated percentage of the work to be subcontracted in relation to the total scope of work in Seller's response. If Seller is not selected to receive the award, MDC shall require Seller to return or destroy the data, at MDC's election. Similarly, MDC may require Seller to certify in writing that it has complied with MDC's directions. |
||
| 06XX | MISCELLANEOUS | |
| 0601 | D-7 | SELLER TO ADVISE LOCATION OF QUALIFICATION TESTS |
| Seller must advise whether all qualification testing is to be done at its facility and if not, what tests are to be subcontracted and to what laboratory. | ||
| 0602 | D-8 | NEW ITEMS REQUIRING QUALIFICATION TEST -- QUALIFIED UNITS |
| Seller's solicitation response must state the number of days (after the date of issuance of the contract contemplated by this solicitation) for delivery of unqualified units and the number of days (after delivery of the unqualified units) for delivery of qualified units. | ||
| 0610 | D-9 | MDC FURNISHED RAW MATERIAL |
| MDC furnished material will be in random lengths or sizes. Seller must specifically state any exception taken to use of randomly sized material in the solicitation response. | ||
| 0615 | NEW* | WARRANTY PERIOD(S) C-17 |
| Seller's solicitation response must state the Warranty period(s) for defects in design and other warranties within the scope of Clause 7315, 7316 or 7317, whichever is applicable to this solicitation. Clause 1420 will state the negotiated Warranty period(s) in the resulting Purchase Order/Contract. |
*New Clause, no corresponding Clause number assigned under "old" scheme.
**New Clause, "old" number assigned for DAC internal use only.
***Clause not published in 1/87 edition of DAC 26-730, but was applied as a full text attachment to purchase orders.